How To Replace a Pre-Installed Inverter Charger With the IC Series Inverter Charger So you think removing your old inverter charger and installing the IC Series inverter charger is difficult? Think again! Sean steps you through the upgrade process here. Watch the video:
Installing the Temp Sensor With Your IC Series Inverter Charger Your battery temperature sensor is an important safety feature, and easy to install and connect with your inverter charger. Sean shows you how here. Watch the video:
Neutral to Ground Bonding Not exactly sure what ‘neutral to ground bonding’ is, and how it impacts your Go Power! installation? Sean walks you through everything you need to know in this short video. Click here for the video:
IC Series Inverter Charger Not Turning Off When Connected Does your inverter charger not appear to be turning off properly when connected to shore power? Sean explains why this happens and what to do about it. Click here for the video:
How to wire an Inverter Charger in an RV Is there a “right” way to wire your IC Series inverter charger? In this video Sean demonstrates how to safely connect your charger and talks about why checking those connections on a regular basis helps prevent potential performance issues. Click here for the video:
Properly Starting an Inverter Charger Is this thing on?! Have you installed and configured your IC Series inverter charger and now you’re ready to start it up? Sean walks you through the proper start-up procedure using the ICR-50 remote and touches on a few ‘dos and don’ts’. Watch the video:
Setting Up Power-Sharing Using the IC Series Remote If you’ll be sharing power between external sources and your batteries, you need to know how to set up the power-sharing feature on your IC Series inverter charger. Here Sean takes you through the configuration steps using the ICR-50 remote. Watch the video here:
How to Set the Battery Type on and Inverter Charger In this final video on configuring your inverter charger using the ICR-50 remote, Sean takes you through how to set your battery type.
Setting the Search Watts Using the IC Series Remote Looking for more details on configuring your inverter charger? In this video, Sean continues with his explanation of how to configure your IC inverter charger. Here he shows you how to set the Search Watts using the ICR-50 remote.
Configuring the Inverter Charger Using the IC Series Remote Have you successfully installed your IC Series inverter charger, but you’re not sure what to do next? In this video, Go Power!’s Sean O’Conner walks you through how to configure your inverter charger using the ICR-50 remote. Watch the video here: