After 27 failed attempts from people around the world, Canadian keynote speakers and National Geographic Adventurers of the Year, Julie and Colin Angus have put their hat into the ring. They are attempting the first successful autonomous solar boat crossing of the Atlantic. Why try this? The obvious attraction is to receive the renowned Guinness

It may not be the Bermuda Triangle, but a mysterious vortex has pulled the curiosity of filmmakers, Ryan Noth and Tess Girard of Fifth Town Films, into the heart of its bizarre existence. Found in the middle of Lake Ontario, this phenomenon has eerily been linked to a high number of disappearing ships and various

How To Replace a Pre-Installed Inverter Charger With the IC Series Inverter Charger So you think removing your old inverter charger and installing the IC Series inverter charger is difficult? Think again! Sean steps you through the upgrade process here. Watch the video:

Installing the Temp Sensor With Your IC Series Inverter Charger Your battery temperature sensor is an important safety feature, and easy to install and connect with your inverter charger. Sean shows you how here. Watch the video:

Neutral to Ground Bonding Not exactly sure what ‘neutral to ground bonding’ is, and how it impacts your Go Power! installation? Sean walks you through everything you need to know in this short video. Click here for the video:

IC Series Inverter Charger Not Turning Off When Connected Does your inverter charger not appear to be turning off properly when connected to shore power? Sean explains why this happens and what to do about it. Click here for the video:

How to wire an Inverter Charger in an RV Is there a “right” way to wire your IC Series inverter charger? In this video Sean demonstrates how to safely connect your charger and talks about why checking those connections on a regular basis helps prevent potential performance issues. Click here for the video:

Proper Start-up of an Inverter Charger Is this thing on?! Have you installed and configured your IC Series inverter charger and now you’re ready to start it up? Sean walks you through the proper start-up procedure using the ICR-50 remote and touches on a few ‘dos and don’ts’. Watch the video:

Setting Up Power-Sharing Using the IC Series Remote If you’ll be sharing power between external sources and your batteries, you need to know how to set up the power-sharing feature on your IC Series inverter charger. Here Sean takes you through the configuration steps using the ICR-50 remote. Watch the video here: