Showing 61–72 of 112 results
Showing 61–72 of 112 results
A solar charge controller is an essential component of your photovoltaic (PV) system. The controller maintains the life of the battery by protecting it from overcharging. When your battery has reached a 100% state of charge, the controller prevents overcharging by limiting the current flowing into the batteries from your solar array.
Our 30 Amp Digital Solar Controller features Maximum Power Boost Technology? (MPBT). This allows you to override the normal charging algorithm of the solar controller to ‘boost’ the solar charge, which is ideal at the end of the daylight to ensure batteries are topped up for the evening. Performance of the solar controller will not be affected if MPBT function is not utilized.
This product is included with most of Solar Kits and all of our complete Solar and Inverter Systems.
The GP-TS is a prewired and circuit protected version of the TS-30, designed with special features to simplify and speed up installation. It includes a cable with built-in plug to connect the inverter output and a receptacle that powers your converter only when shore power is available.
The Go Power! Transfer Switch 30 amp (TS-30) provides automatic power switching between two separate 120 volt AC input sources. Some inverter installations integrate the inverter directly into the AC electrical system. An automatic transfer switch is usually installed to allow both your inverter and shore power to alternatively feed the circuits and prevent AC back feed. The Go Power! TS-30 is a 30 amp AC switch that automatically connects shore power (when available) to your breaker panel. When unplugged from power, it then connects your inverter output to power your circuits.
1. Shore Power
2. Go Power! Transfer Switch
3. to AC panel
4. Go Power! Inverter
5. Go Power! Battery Charger or stock converter charger
This accessory is essential if you want to park your RV in the shade! Extend the distance of where your PORTABLE SOLAR KIT is placed with this 30 ft extension cord. It has female to male anderson connectors, making the connection easy and quick.
Not included in Portable Solar Kits.
The FLEX-30 Solar Flex Module provides 30W of power in a high-efficiency, monocrystalline thin film solar panel that provides outstanding performance and cost-effective solar power for high-end off-grid and mobile applications. Unlike other “thin” products, Solar Flex uses high-efficiency monocrystalline cells that produce more power per square foot than any other flat panel on the market.
An impermeable lamination coats the entire module, allowing it to contour and flex against curved areas, eliminating any need for custom mounts. The flat, lightweight module is less than 1/8 inch thick and provides an extremely durable surface. The panel can be affixed by adhesive or screw mounting options and quick-connect MC4 cables are an added bonus for ease-of-installation.
Perfect for RV’s and boats, its flexible design can conform to almost any surface. The panels are only 3 mm thick, making them easy to install. The thin, lightweight design provides a low profile, which is aesthetically pleasing and more aerodynamic that traditional rigid solar modules. The solar panels are durable, providing you with a long-term solution to your solar power needs.
An impermeable lamination coats the entire Solar Flex™ module, allowing it to contour and flex against curved surfaces, eliminating any need for custom mounts. The panel can be affixed by adhesive or screws, and grommets are provided for ease of installation.
Sealant/adhesive required will depend on roof membrane material and is not included in the Solar Flex kit. Use an appropriate sealant as recommended by your RV dealer or manufacturer.
Small, lightweight and portable, the Go Power! GP-300 modified sine wave inverter is an easy solution for small power loads. Just plug it into your vehicle’s lighter socket, and its ready to go. Great for powering lights and TVs, recharging phones and cameras, or as a back-up power source, the Go Power!? GP-300 is suitable for a range of applications.
duplex GFCI receptaclefull overload protectionpower save modeRated Power300 WSurge Power450 WInput Voltage10.5 – 15 VDC (12V) / 21.0 – 30.0 VDC (24V)Output Voltage110 VAC RMSOutput WaveformPure Sine WaveOutlets2 GFCIDimensions9.25 x 6.1 x 2.75 inchesWeight7.7 lbsInverter Remote Options:Option for 2 wire switchDC Connect:Anderson Lug TerminalsInverter Fuse Options:See Go Power! Fuse Block page for details�
The Go Power! GP-3000HD provides enough power to run several appliances at once. With a 3000-watt output, this inverter is an excellent choice for most large power requirements. Plug your appliances directly into its four AC outlets, or wire it into your electrical system using the optional Go Power! transfer switch.
Ideal for powering several appliances, or as a source of emergency back-up power, the GP-3000HD fits a range of applications.
Our largest pure sine wave inverter, the Go Power! GP-ISW3000 is the ultimate choice for large loads that demand an exact replica of AC power. The GP-ISW3000 can run any tool or appliance within its wattage range. The GP-ISW3000 is the professionals choice for clean reliable power when you need it.
Ideal for powering multiple appliances, electronic equipment like TVs, stereos, computers, or as a source of emergency backup power, the Go Power! GP-ISW3000 is suitable for a range of applications. This inverter is included in our largest solar system, the SOLAR EXTREME, which features three solar panels, a converter chargers, transfer switch and all mounting hardware required to install on any RV or long-haul truck.
View our complete line of Industrial Pure Sine Wave inverters. Additional information can be found in:
Regulates and prevents the solar panel from overcharging batteries. Maximum Power Point Tracking (MPPT) charging and 3 battery charging profiles.