This page is for information purposes only. This product is only available pre-wired on RV's and is not available for aftermarket installations.
A Solar Controller is an essential component of your photovoltaic (PV) system. The Controller maintains the life of the battery by protecting it from overcharging. When your battery has reached a 100% state of charge, the Controller prevents overcharging by limiting the current flowing into the batteries from your solar array.
The GP-PWM-30-SQ is a 12 volt surface mounted photovoltaic (PV) charge controller rated for a continuous solar current input of 30 amps.
|
Nominal System Voltage |
12V |
|
Max Solar Array Current |
30A |
|
Battery Voltage Range |
6V – 15.5V |
|
Max. Solar panel input voltage |
25V |
|
Temp. Compensation |
-24mV/ºF / cell*K |
|
Operating Temperature |
– 13 to 122ºF / – 20 to 50ºC |
|
Humidity |
100% N.C. |
|
Dimensions (H x W x D): |
6.14 x 4.08 x 1.50 in; 156 x 122 x 38 mm |
|
Weight |
5.34 oz; 151 grams |
|
Maximum Wire Gauge: |
#6 AWG |
|
Warranty |
1 year |
|
Protection |
Battery Reverse Polarity, Solar Array Reverse Polarity, Over temperature, Over Current |
|
Battery Charging Profile |
Sealed/Gel |
AGM |
Flooded |
LifePO4 |
|
Bulk Charge Voltage Set Point |
14.1V |
14.4V |
14.7V |
14.4V |
|
Absorption Charge Voltage (30 min / day) |
14.1V |
14.4V |
14.4V |
14.4V |
|
Max. Power Boost Charge Voltage: Automatic (2h if V < 12.3V) |
14.1V |
14.4V |
14.4V |
14.4V |
|
Max. Power Boost Charge Voltage: Manual (2h if activated) |
14.1V |
14.4V |
14.4V |
14.4V |
|
Float Charge Voltage |
13.0V |
13.0V |
13.0V |
14.0V |
|
Equalize Charge Voltage (2h / 28 days or after V < 12.1V) |
Disabled |
Disabled |
15.0V |
Disabled |
