Sort By:


100Ah Lithium Iron Phosphate Solar Battery

Efficient, high-powered performance. 100Ah Lithium Iron Phosphate Solar Battery.  Built for solar.

Product Overview


Go further off-the-grid with the new Go Power! 100ah Lithium Iron Phosphate solar battery. Built specifically for mobile applications, this deep cycle battery is ideal for use in an RV. This 100-amp hour battery is a drop-in replacement for Class 31 Lead-Acid.


Product Specifications

FAQ & Support

+-Can these be used as starting batteries?

No, they are not suited to be used in this application.

+-Are there any wiring restrictions?

Yes. You can not wire more than 4 of these batteries in parallel. These batteries cannot be wired in series.

+-What does LiFePO4 stand for?

LiFePO4 stands for Lithium Iron Phosphate, this is the chemistry of our 12 volt lithium batteries

+-What is the recommended Depth of Discharge for these batteries?

To increase the longevity of the battery, we recommend to discharge no lower than 20-30% regularly.

+-Is a battery kill switch for winter storage?

No, there is no need to add a kill switch.

+-Do lithium batteries need to be taken out for the winter or can they be left in the trailer/RV? (Will they freeze?)

Yes, it is recommended to take the lithium batteries out like any deep cycle battery. Lithium batteries do not like cold temperatures. They will not take a charge below 0 degrees and like any battery they can freeze at one point.

+-Do lithium batteries go dead from sitting while stored?

Lithium batteries will discharge overtime like any battery but they do it at a much slower rate. We recommend giving them a quick charge every couple of months and to keep them in peak condition.

+-How do you charge a lithium battery in cold or warm weather?

It is better to charge lithium batteries in warmer temperatures. Lithium batteries will not accept charge at freezing or below. The charging temperature range on our batteries is 32°F (0°C) - 131°F (55°C)

+-What settings are used on the inverter/charger for the lithium batteries?

Use the custom battery charger setting on the Inverter/Charger units. See the instructions below for more info. IC Series Go Power Lithium Battery Set Up: Go to Unit Setting and hit enter; Scroll to Final Charge and hit enter; Scroll to set to Float and hit enter; Scroll through unit setting to battery type and hit enter; Scroll to Custom and hit enter; Set absorption to 14.3VDC and hit enter; Set Float to 14.1VDC and hit enter; Set equalize to 14.1VDC and hit enter; You are now set for charging Go Power 12 volt lithium batteries.