Installing a Go Power! Inverter

Go Power! offers three easy ways to install your new power inverter. Make sure you read through your user manual before tackling your inverter installation.

Option 1: Plug & Power

Plug & Power is the easiest way to install Go Power! Inverters. Your inverter should be located close to the batteries but in a protected area free from moisture, dust, dirt and battery fumes. The DC Install Kits listed on page 10 contain everything you need to install your inverter properly. Once installed, simply plug your power cord into your Go Power! Inverter and you will have AC power.

Overview

  • Install the inverter near the batteries (<10’ away)
  • If available, plug shore power cord into inverter when camping
  • To prevent extra battery drain, turn off the converter when using the inverter

 

 

Option 2: Go Power! Hardwire with standard Automatic Transfer Switch

Option Two: Go Power! Hardware with the standard automatic transfer switch

Use the TS-30 automatic transfer switch with your Go Power! inverter to automatically switch from shore power (when available) to inverter power.

Wire your converter to the shore power side of the transfer switch to ensure the inverter is not being used to charge the RV batteries.

 

Overview

  • Install the inverter near the batteries (<10’ away)
  • Wire the TS-30 to shore power, inverter and RV load center
  • Converter or battery chargers are wired to the TS-30 shore input to prevent extra battery drain when the inverter is being used

 

Option 3: Go Power! Hardwire with Go Power! Prewired Automatic Transfer Switch

The Go Power! Inverter and the Go Power! Transfer Switch (GP-TS) are combined with a GPC Smart Battery Charger to create a totally hands-free system. Add a GPC-Smart Controller and take advantage of high powered three-stage smart charging capabilities.

 

Overview

  • GP-TS is wired to shore power, RV load centre and plugs directly into the inverter
  • GPC Converter plugs into the outlet on the GP-TS. The converter automatically turns off when using inverter power

 

Note: Consult all inverter manuals for complete instructions prior to installation!