Optional MPPT Remote Connection Learn the benefits of an MPPT Remote connection and how to connect it to your GP-MPPT-40 Solar Controller.  

GP-MPPT-40 Solar Controller Terminal Connections Learn how easy it is to set up your Go Power! MPPT 40 amp Solar Controller terminal connections with this easy-to-follow instructional video.  

GP-MPPT-40 Solar Controller Dip Switch Positions   This video will show you the different positions of the Dip Switch on the MPPT 40 amp Solar Controller and what their configurations mean.  

Troubleshooting: GP-PWM-30-UL Voltage Overload Is your PWM solar controller flashing and not behaving properly? It could be due to a voltage overload. This video will show you some options to fix this issue.

Set the Battery Profile on a GP-PWM-30-UL Solar Controller Learn how to change your PWM-30-UL solar controller. (Includes the newest Lithium update!)  

GO POWER! NAMED ONE OF THE “WORLD’S GREATEST!…” ON TV SHOW LIGHTS…CAMERA…ACTION! It’s an exciting start to the New Year for us here at Go Power!. To kick the year off with a bang, Go Power! and our solar technology solutions were featured on the popular “World’s Greatest!…” television show (WGTV). Click here to watch

How To Replace a Pre-Installed Inverter Charger With the IC Series Inverter Charger So you think removing your old inverter charger and installing the IC Series inverter charger is difficult? Think again! Sean steps you through the upgrade process here. Watch the video:

Installing the Temp Sensor With Your IC Series Inverter Charger Your battery temperature sensor is an important safety feature, and easy to install and connect with your inverter charger. Sean shows you how here. Watch the video:

Neutral to Ground Bonding Not exactly sure what ‘neutral to ground bonding’ is, and how it impacts your Go Power! installation? Sean walks you through everything you need to know in this short video. Click here for the video:

IC Series Inverter Charger Not Turning Off When Connected Does your inverter charger not appear to be turning off properly when connected to shore power? Sean explains why this happens and what to do about it. Click here for the video: